About Marchien Breman

This author has not yet filled in any details.
So far Marchien Breman has created 62 blog entries.
30 06, 2017

3D print tip: How to increase your 3D printing speed

5 ways to increase your 3D printing speed Fast prototyping is possible with a 3D printer. However, sometimes a higher 3D printing speed is preferred. Our helpdesk often receive the question whether it is possible to increase the 3D printing speed. This is possible, but it may affect the quality of the 3D print. [...]

8 06, 2017

What are the advantages of the FDM technology?

What are the advantages of the FDM technology? There are many different 3D printing techniques. The best known techniques are: Selective Laser Sintering (SLS), Stereolithography (SLA), and Fused Deposition Modeling (FDM). The SLS technique functions by repeatedly dosing a layer of powder on a powder bed. The form of the product is created by [...]

6 06, 2017

Wat zijn de voordelen van de FDM technologie?

Wat zijn de voordelen van de FDM technologie? Er bestaan veel verschillende technieken in 3D printen. De meest bekende printtechnieken zijn: Selective Laser Sintering (SLS), Stereolithografie (SLA) en Fused Deposit Modeling (FDM). Met SLS wordt op een poederbed een laag poeder gedoseerd. Op een selectief deel van het poederbed wordt de vorm van het [...]

24 05, 2017

3D printing landmarks: project Achterhoek in 3D.

The project Achterhoek in 3D is in full swing. Do you remember the project ‘Achterhoek in 3D’? In this project the nine landmarks that represent the Achterhoek region the best are 3D printed. For this unique project the participants use the dddrop 3D printer. Now that the buildings with the most votes are known, [...]

24 05, 2017

3D printing landmarks: project Achterhoek in 3D.

The project Achterhoek in 3D is in full swing. Do you remember the project ‘Achterhoek in 3D’? In this project the nine landmarks that represent the Achterhoek region the best are 3D printed. For this unique project the participants use the dddrop 3D printer. Now that the buildings with the most votes are known, [...]

24 05, 2017

3D printing landmarks: project Achterhoek in 3D.

The project Achterhoek in 3D is in full swing. Do you remember the project ‘Achterhoek in 3D’? In this project the nine landmarks that represent the Achterhoek region the best are 3D printed. For this unique project the participants use the dddrop 3D printer. Now that the buildings with the most votes are known, [...]

10 05, 2017

ICER: a 2m² 3D printed patron St. George

ICER: a 2m² 3D printed patron St. George 3D printing allows the creation of unique designs. As you may have seen before in the video Eric Huls [DUTCH] of Innovation Center ICER started a remarkable project: printing a two square meter model of patron St. George. After successfully printing a smaller prototype, now the real [...]

10 05, 2017

ICER: a 2m² 3D printed patron St. George

ICER: a 2m² 3D printed patron St. George 3D printing allows the creation of unique designs. As you may have seen before in the video Eric Huls [DUTCH] of Innovation Center ICER started a remarkable project: printing a two square meter model of patron St. George. After successfully printing a smaller prototype, now the real [...]

10 05, 2017

ICER: a 2m² 3D printed patron St. George

ICER: a 2m² 3D printed patron St. George 3D printing allows the creation of unique designs. As you may have seen before in the video Eric Huls [DUTCH] of Innovation Center ICER started a remarkable project: printing a two square meter model of patron St. George. After successfully printing a smaller prototype, now the real [...]

9 05, 2017

dddrop 3D printers firmware upgrade 170428

dddrop 3D printers firmware upgrade 170428: what is new? We are always focused on improving customer experience and constantly improve our products to match customer needs. The new firmware 170428 offers great new features. New features: Filament detection compatible. Improved filament detection module compatibility Smart compatible. Remote printer control via Smart Module. “USB printing” indication, [...]

9 05, 2017

dddrop 3D printers firmware upgrade 170428

dddrop 3D printers firmware upgrade 170428: what is new? We are always focused on improving customer experience and constantly improve our products to match customer needs. The new firmware 170428 offers great new features. New features: Filament detection compatible. Improved filament detection module compatibility Smart compatible. Remote printer control via Smart Module. “USB printing” indication, [...]

9 05, 2017

dddrop 3D printers firmware upgrade 170428

dddrop 3D printers firmware upgrade 170428: what is new? We are always focused on improving customer experience and constantly improve our products to match customer needs. The new firmware 170428 offers great new features. New features: Filament detection compatible. Improved filament detection module integration. Smart compatible. Remote printer control via Smart Module. “USB printing” indication, printer [...]

21 04, 2017

Te Kulve makes beautiful bronzes by use of the dddrop 3D printer!

Te Kulve makes beautiful bronzes by use of the dddrop 3D printer! The craft of bronze casting is more than a thousand years old. Over the years, new techniques have been developed that make the work much easier. But how can you as an artist use modern techniques without losing the authentic craft? Artist [...]

21 04, 2017

Te Kulve makes beautiful bronzes by use of the dddrop 3D printer!

Te Kulve makes beautiful bronzes by use of the dddrop 3D printer! The craft of bronze casting is more than a thousand years old. Over the years, new techniques have been developed that make the work much easier. But how can you as an artist use modern techniques without losing the authentic craft? Artist [...]

21 04, 2017

Te Kulve makes beautiful bronzes by use of the dddrop 3D printer!

Te Kulve makes beautiful bronzes by use of the dddrop 3D printer! The craft of bronze casting is more than a thousand years old. Over the years, new techniques have been developed that make the work much easier. But how can you as an artist use modern techniques without losing the authentic craft? Artist [...]

30 03, 2017

Channel Trends + Visions trade show in Bochum

Visit dddrop at Channel Trends + Visions trade show in Bochum, Germany.The 7th of April Channel Trends + Visions (CTV) trade show celebrate their 10 year anniversary. CTV is the largest ICT trade show in Germany. This year the main themes are Cloud, Internet of Things and Smart Home. We will show our dddrop 3D printers including our [...]

30 03, 2017

Channel Trends + Visions trade show in Bochum

Visit dddrop at Channel Trends + Visions trade show in Bochum, Germany.The 7th of April Channel Trends + Visions (CTV) trade show celebrate their 10 year anniversary. CTV is the largest ICT trade show in Germany. This year the main themes are Cloud, Internet of Things and Smart Home. We will show our dddrop 3D printers including our [...]

30 03, 2017

Channel Trends + Visions trade show in Bochum

Visit dddrop at Channel Trends + Visions trade show in Bochum, Germany.The 7th of April Channel Trends + Visions (CTV) trade show celebrate their 10 year anniversary. CTV is the largest ICT trade show in Germany. This year the main themes are Cloud, Internet of Things and Smart Home. We will show our dddrop 3D printers including our [...]

23 03, 2017

3DG-Project enters new markets with the dddrop 3D printer!

3DG-Project enters new markets with the dddrop 3D printer! Anyone who has once bought a house in Belgium, is probably aware of the EPB certificate. This certificate is the same as the Dutch Energy Label and is required when selling a house. The company 3DG-Project BVBA is specialized in issuing these EPB certificates. In [...]

23 03, 2017

3DG-Project enters new markets with the dddrop 3D printer!

3DG-Project enters new markets with the dddrop 3D printer! Anyone who has once bought a house in Belgium, is probably aware of the EPB certificate. This certificate is the same as the Dutch Energy Label and is required when selling a house. The company 3DG-Project BVBA is specialized in issuing these EPB certificates. In [...]

23 03, 2017

3DG-Project enters new markets with the dddrop 3D printer!

3DG-Project enters new markets with the dddrop 3D printer! Anyone who has once bought a house in Belgium, is probably aware of the EPB certificate. This certificate is the same as the Dutch Energy Label and is required when selling a house. The company 3DG-Project BVBA is specialized in issuing these EPB certificates. In [...]

8 03, 2017

dddrop opent haar deuren: Innovatiefestival 2017

dddrop opent haar deuren: Innovatiefestival 2017 Van 8 t/m 21 maart vindt het innovatiefestival in de Achterhoek plaats. Het doel van het festival is om werkenden, studenten en ondernemers bij elkaar te brengen en samen te beleven wat er allemaal gebeurt in de Achterhoek op het gebied van Smart Industry en innovatie. dddrop [...]

24 02, 2017

Introduction dddrop Smart Module at RapidPro 2017

On the 7th, 8th and 9th of March, we will show our dddrop 3D printers at the RapidPro 2017 in Veldhoven, the Netherlands. The RapidPro 2017 is a leading fair for 3D printing which covers prototyping, production and product development. You will find the whole chain from idea to product. Also, leading organisations, national as [...]

24 02, 2017

Introduction dddrop Smart Module at RapidPro 2017

On the 7th, 8th and 9th of March, we will show our dddrop 3D printers at the RapidPro 2017 in Veldhoven, the Netherlands. The RapidPro 2017 is a leading fair for 3D printing which covers prototyping, production and product development. You will find the whole chain from idea to product. Also, leading organisations, national as [...]