Print tips

16 01, 2019

Advantages of printing with PET-G Carbon

The advantages of the material PET-G Carbon When printing with an FDM 3D-printer, PLA is by far the most well-known and commonly used printing material, because it is inexpensive and relatively simply to use in 3D printing. PLA does have its drawbacks, for example with heat resistance; however, nowadays there are many different printing materials available, offering a [...]

8 10, 2018

3D print tip: How to maintain your 3D-printer?

Does my 3D printer need maintenance? The first printing hours have passed and by now, your 3D printer has become indispensable for your development and production process. Before you leave for home at night, you quickly want to start the printer, so your prototype will be waiting for you in the morning. Nothing more frustrating [...]

13 08, 2018

3D print tip: How to perfectly print a thin-walled product

How to perfectly print a thin-walled product? With FDM printing, a model is constructed by printing layers of filament (plastic). This filament is heated until it melts and is then guided through the nozzle of the printer. The width of the layer that is printed onto the print bed is partly determined by the size [...]

5 06, 2018

3D print tip: How do I make sure that my print does not warp?

Especially with ABS but also with less common materials like nylon, the materials sometimes wants to deform during printing. This warping leads to unsuccessful products and sometimes even to a hard hit: the printhead clashes up against the pulled up material. Naturally you want to avoid that! Why does a product warp? A print can [...]

5 06, 2018

3D print tip: What is delamination and how do you prevent it?

We are talking about delamination in 3D printing when there is a shrinkage higher in the product, during printing. When and how fast a product shrinks depends heavily on the type of material you use while printing. PLA and PET-G are not sensitive to this, but when you use more complex, shrink-sensitive materials such as [...]

15 05, 2018

3D print tip: A sleek 3D product without strings

When your 3D printer’s head needs to reposition from one point in your model to another, the filament might ooze. The result is stringing: small strings of material appear between the printed parts. Stringing especially occurs with models that have big open spaces, but there are ways to avoid it. The right material Whether stringing [...]

9 05, 2018

3D print tip: Why don’t my printing layers merge properly?

When not all layers of your 3D print are printed correctly, this is probably due to under extrusion. Under extrusion is a complex problem that can cause missing layers or layers that are not completely printed, leading to holes in the model. Unfortunately, we cannot point out one single culprit. Under extrusion can have various [...]

23 02, 2018

3D print tip: Creating a strong infill

Creating a strong infill The infill is an important factor in your product’s strength. Therefore, it’s important to prevent the infill from being too thin or stringy with the tips underneath. Various patterns: There are several infill patterns to choose from and they each lead to different tenacities. Examples of robust infill types are [...]

24 01, 2018

dddrop case study: High-precision parts with poly-carbonate

FROM DESIGN TO MANUFACTURING “Ejair offers a broad range of services, from technical design to the production of small series. We also produce scale models and prototypes. These are very useful, because you directly hold a physical product. For the production of prototypes and small series, Erik-Jan uses the dddrop 3D printer. His customers are [...]

27 11, 2017

Carbon fiber parts with dddrop 3D printers

3D Printing strong Carbon-fiber parts with dddrop 3D printers At the dddrop 3D printer laboratory the range of printing materials is expanding continuously. The PETG+Carbon material gives our users new possibilities printing high strength parts for applications that demand more than just plastics. The Carbon fibers are really improving the, already quite tough, PETG material [...]

30 06, 2017

3D print tip: How to increase your 3D printing speed

5 ways to increase your 3D printing speed Fast prototyping is possible with a 3D printer. However, sometimes a higher 3D printing speed is preferred. Our helpdesk often receive the question whether it is possible to increase the 3D printing speed. This is possible, but it may affect the quality of the 3D print. [...]

1 06, 2016

3D print tip: How-To? Control the right Nozzle – bed distance

With many different printing materials it can be challenging to find the right distance for the print-nozzle towards the glass bed-surface. We are now implementing a standard setting for most different materials PLA, ABS en PET-G. Where ABS needs a pretty small distance, PET-G needs more space. The perfect distance is also somewhat depending on [...]

Go to Top