Print tips

15 05, 2018

3D print tip: A sleek 3D product without strings

When your 3D printer’s head needs to reposition from one point in your model to another, the filament might ooze. The result is stringing: small strings of material appear between the printed parts. Stringing especially occurs with models that have big open spaces, but there are ways to avoid it. The right material Whether stringing [...]

9 05, 2018

3D print tip: Why don’t my printing layers merge properly?

When not all layers of your 3D print are printed correctly, this is probably due to under extrusion. Under extrusion is a complex problem that can cause missing layers or layers that are not completely printed, leading to holes in the model. Unfortunately, we cannot point out one single culprit. Under extrusion can have various [...]

23 02, 2018

3D print tip: Creating a strong infill

dddrop 3D printtips: Creating a strong infill. The infill is an important factor in your product’s strength. Therefore, it’s important to prevent the infill from being too thin or stringy with the tips underneath. Various patterns: There are several infill patterns to choose from and they each lead to different tenacities. Examples of robust infill [...]

24 01, 2018

dddrop case study: High-precision parts with poly-carbonate

FROM DESIGN TO MANUFACTURING “Ejair offers a broad range of services, from technical design to the production of small series. We also produce scale models and prototypes. These are very useful, because you directly hold a physical product. For the production of prototypes and small series, Erik-Jan uses the dddrop 3D printer. His customers are [...]

27 11, 2017

Carbon fiber parts with dddrop 3D printers

3D Printing strong Carbon-fiber parts with dddrop 3D printers At the dddrop 3D printer laboratory the range of printing materials is expanding continuously. The PETG+Carbon material gives our users new possibilities printing high strength parts for applications that demand more than just plastics. The Carbon fibers are really improving the, already quite tough, PETG material [...]

25 08, 2017

3D print tip: How do I keep my nozzle running smooth?

How do I keep my nozzle running smooth? Sometimes the filament does neatly get transported into your printer, but it doesn’t flow from your nozzle. It piles up in the print head. Why does this happen? And of course: how can you prevent this? Piling up in the nozzle When the nozzle is obstructed, [...]

30 06, 2017

3D print tip: How to increase your 3D printing speed

How to increase your 3D printing speed Fast prototyping is possible with a 3D printer. However, sometimes a higher 3D printing speed is preferred. Our helpdesk often receive the question whether it is possible to increase the 3D printing speed. This is possible, but it may affect the quality of the 3D print. In [...]

1 06, 2016

3D print tip: How-To? Control the right Nozzle – bed distance

With many different printing materials it can be challenging to find the right distance for the print-nozzle towards the glass bed-surface. We are now implementing a standard setting for most different materials PLA, ABS en PET-G. Where ABS needs a pretty small distance, PET-G needs more space. The perfect distance is also somewhat depending on [...]